HTS
2023 HTSA Revision 9
Search Results:16
3907
Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms:
3920.61.00.00
Of polycarbonates
9902.12.51
Camera cases of transparent polycarbonate plastics, designed to encase cameras of subheading 8525.80.40; each incorporating buttons for the operation of the camera, an opaque plastic base that clips into a camera mount, a thumb-screw on the base mount that allows for adjustment of the camera viewing angle on a pivot, a silicon gasket in the door of the case that allows for waterproof operation of the camera at a depth of more than 40 m but not more than 60 m, a flat and optically-coated glass lens and a heat sink to dissipate camera heat (provided for in subheading 4202.99.90).
9902.12.52
Cases of clear polycarbonate plastics, designed for use with cameras of subheading 8525.80.40 to affix camera to the user's wrist; such housings waterproof at a depth up to 60 m, each incorporating buttons for operation of the camera, a silicon gasket designed for waterproofing, a flat and optically-coated glass lens, an aluminum heat sink and adjustable neoprene/hook and loop closures on its wrist straps (provided for in subheading 4202.99.90).
9902.12.53
Cases or containers of injection-molded acrylonitrile-butadiene-styrene (ABS), polypropylene (PP) or polycarbonate (PC) plastics, the foregoing specially shaped or fitted for, and with labeling, logo or other descriptive information on the exterior of the case or container, its zipper pull or its retail packaging indicating such cases are designed for use as holders for electronic games of subheading 9504 or accessories thereof (provided for in subheading 4202.99.90)
9902.12.54
Camera cases with outer surface of transparent molded polycarbonate plastics, designed for cameras of subheading 8525.80.40; the foregoing each incorporating buttons for the operation of the camera, an opaque plastic base that clips into a camera mount, a thumb-screw on the base mount that allows for adjustment of the camera viewing angle on a pivot, a silicon gasket in the door of the case that allows for waterproof operation of the camera at a depth of not more than 40 m, a flat, optically-coated, glass lens and a heat sink to dissipate camera heat (provided for in subheading 4202.99.90)
9902.12.55
Camera cases of molded polycarbonate plastics, such cases designed to hold cameras of subheading 8525.80.40, each case incorporating buttons for the operation of the camera, a plastic clip attached to a base mount, a thumb-screw on the base mount that allows adjustment of the viewing angle on a pivot, a flat and optically-coated glass lens and open spaces that allow air and sound to enter (provided for in subheading 4202.99.90).
9902.12.56
Camera cases designed to contain cameras of subheading 8525.80.40; such cases of opaque molded polycarbonate plastics in a solid color and with nonreflective surface; each incorporating buttons for the operation of the camera, a plastic clip attached to a base mount, a thumb-screw on the base mount designed to facilitate the adjustment of its viewing angle on a pivot, a silicon gasket in the door of the housing designed to allow for waterproof operation of the camera at a depth of more than 40 m but not more than 60 m; each incorporating a flat, optically-coated glass lens and a heat sink to dissipate camera heat (provided for in subheading 4202.99.90).
3907
Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms:
3920.61.00.00
Of polycarbonates
9902.12.51
Camera cases of transparent polycarbonate plastics, designed to encase cameras of subheading 8525.80.40; each incorporating buttons for the operation of the camera, an opaque plastic base that clips into a camera mount, a thumb-screw on the base mount that allows for adjustment of the camera viewing angle on a pivot, a silicon gasket in the door of the case that allows for waterproof operation of the camera at a depth of more than 40 m but not more than 60 m, a flat and optically-coated glass lens and a heat sink to dissipate camera heat (provided for in subheading 4202.99.90).
9902.12.52
Cases of clear polycarbonate plastics, designed for use with cameras of subheading 8525.80.40 to affix camera to the user's wrist; such housings waterproof at a depth up to 60 m, each incorporating buttons for operation of the camera, a silicon gasket designed for waterproofing, a flat and optically-coated glass lens, an aluminum heat sink and adjustable neoprene/hook and loop closures on its wrist straps (provided for in subheading 4202.99.90).
9902.12.53
Cases or containers of injection-molded acrylonitrile-butadiene-styrene (ABS), polypropylene (PP) or polycarbonate (PC) plastics, the foregoing specially shaped or fitted for, and with labeling, logo or other descriptive information on the exterior of the case or container, its zipper pull or its retail packaging indicating such cases are designed for use as holders for electronic games of subheading 9504 or accessories thereof (provided for in subheading 4202.99.90)
9902.12.54
Camera cases with outer surface of transparent molded polycarbonate plastics, designed for cameras of subheading 8525.80.40; the foregoing each incorporating buttons for the operation of the camera, an opaque plastic base that clips into a camera mount, a thumb-screw on the base mount that allows for adjustment of the camera viewing angle on a pivot, a silicon gasket in the door of the case that allows for waterproof operation of the camera at a depth of not more than 40 m, a flat, optically-coated, glass lens and a heat sink to dissipate camera heat (provided for in subheading 4202.99.90)
9902.12.55
Camera cases of molded polycarbonate plastics, such cases designed to hold cameras of subheading 8525.80.40, each case incorporating buttons for the operation of the camera, a plastic clip attached to a base mount, a thumb-screw on the base mount that allows adjustment of the viewing angle on a pivot, a flat and optically-coated glass lens and open spaces that allow air and sound to enter (provided for in subheading 4202.99.90).
9902.12.56
Camera cases designed to contain cameras of subheading 8525.80.40; such cases of opaque molded polycarbonate plastics in a solid color and with nonreflective surface; each incorporating buttons for the operation of the camera, a plastic clip attached to a base mount, a thumb-screw on the base mount designed to facilitate the adjustment of its viewing angle on a pivot, a silicon gasket in the door of the housing designed to allow for waterproof operation of the camera at a depth of more than 40 m but not more than 60 m; each incorporating a flat, optically-coated glass lens and a heat sink to dissipate camera heat (provided for in subheading 4202.99.90).
| Heading/ Subheading |
Stat Suffix |
Article Description | Unit of Quantity |
Rates of Duty | ||
| 1 | 2 | |||||
| General | Special | |||||
| Heading/ Subheading |
Stat Suffix |
Article Description | Unit of Quantity |
Rates of Duty | ||
| 1 | 2 | |||||
| General | Special | |||||
| 3907 | Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms: | |||||
| 3907.10.00 | 00 | Polyacetals | kg | 6.5% | Free (A,AU,BH,CL,CO,D,E,IL,JO,K,KR,MA,OM,P,PA,PE,S,SG) | 2.2¢/kg + 33.5% |
| Other polyethers: | ||||||
| 3907.21.00 | 00 | Bis(polyoxyethylene) methylphosphonate | kg | 6.5% | Free (A, AU, BH, CL, CO, D, E, IL, JO, K, KR, MA, OM, P,PA, PE, S, SG) | 2.2¢/kg + 33.5% |
| 3907.29.00 | 00 | Other | kg | 6.5% | Free(A, AU, BH, CL, CO, D, E, IL, JO, K, KR, MA, OM, P,PA, PE, S, SG) | 2.2¢/kg + 33.5% |
| 3907.30.00 | 00 | Epoxide resins | kg | 6.1% | Free (A*,AU,BH,CL,CO,D,E,IL,JO,K,KR,MA,OM,P,PA,PE,S,SG) | 15.4¢/kg + 47% |
| 3907.40.00 | 00 | Polycarbonates | kg | 5.8% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 15.4¢/kg + 45% |
| 3907.50.00 | 00 | Alkyd resins | kg | 6.5% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 15.4¢/kg + 45% |
| Poly(ethylene terephthalate): | ||||||
| 3907.61.00 | Having a viscosity number of 78 ml/g or higher | 6.5% | Free (A*,AU,BH,CL,CO,D,E,IL,JO,K,KR,MA,OM,P,PA,PE,S,SG) | 15.4¢/kg + 45% | ||
| 10 | Having a viscosity number of 78 ml/g or more but not more than 88 ml/g | kg | ||||
| 50 | Other | kg | ||||
| 3907.69.00 | Other | 6.5% | Free (A*,AU,BH,CL,CO,D,E,IL,JO,K,KR,MA,OM,P,PA,PE,S,SG) | 15.4¢/kg + 45% | ||
| 10 | Having a viscosity number of 70 ml/g or more but less than 78 ml/g | kg | ||||
| 50 | Other | kg | ||||
| 3907.70.00 | 00 | Poly(lactic acid) | kg | 6.5% | Free (A*,AU,BH,CL,CO,D,E,IL,JO,K,KR,MA,OM,P,PA,PE,S,SG) | 15.4¢/kg + 45% |
| Other polyesters: | ||||||
| 3907.91 | Unsaturated: | |||||
| Allyl resins: | ||||||
| 3907.91.20 | 00 | Allyl resins, uncompounded | kg | Free | 15.4¢/kg + 45% | |
| 3907.91.40 | 00 | Other | kg | 5.8% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 15.4¢/kg + 45% |
| 3907.91.50 | 00 | Other | kg | 6.5% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 15.4¢/kg + 45% |
| 3907.99 | Other: | |||||
| 3907.99.20 | 00 | Thermoplastic liquid crystal aromatic polyester copolymers | kg | Free | 15.4¢/kg + 45% | |
| 3907.99.50 | Other | 6.5% | Free (A*,AU,BH,CL,CO,E,IL,JO,K,KR,MA,OM,P,PA,PE,S,SG) | 15.4¢/kg + 45% | ||
| 10 | Polybutylene terephthalate | kg | ||||
| 50 | Other | kg | ||||