HTS
2023 HTSA Revision 9
Search Results:83
7228
Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel:
7228.10.00
Bars and rods, of high-speed steel
7228.10.00.10
Not cold-formed
7228.10.00.30
With a maximum cross-sectional dimension of less than 18 mm
7228.10.00.60
With a maximum cross-sectional dimension of 18 mm or more
7228.20
Bars and rods, of silico-manganese steel:
7228.20.10.00
Not cold-formed
7228.20.50.00
Cold-formed
7228.30
Of tool steel (other than high-speed steel):
7228.30.20.00
Of ball-bearing steel
7228.30.40.00
Of chipper knife steel, not cold-formed
7228.30.60.00
Other
7228.30.80
Other
7228.30.80.05
Of high-nickel alloy steel
7228.30.80.10
Concrete reinforcing bars and rods
7228.30.80.15
With a diameter or cross section measuring less than 76 mm
7228.30.80.41
With a diameter or cross section measuring 76 mm or more but not exceeding 152 mm
7228.30.80.45
With a diameter or cross section measuring 152 mm or more but not exceeding 228 mm
7228.30.80.70
With a diameter or cross section exceeding 228 mm
7228.40.00.00
Other bars and rods, not further worked than forged
7228.50
Other bars and rods, not further worked than cold-formed or cold-finished:
7228.50.10
Of tool steel (other than high-speed steel)
7228.50.10.10
Of ball-bearing steel
7228.50.10.20
Of round or rectangular cross section with surfaces ground, milled or polished
7228.50.10.40
Other
7228.50.10.60
Of round or rectangular cross section with surfaces ground, milled or polished
7228.50.10.80
Other
7228.50.50
Other
7228.50.50.05
Of high-nickel alloy steel
7228.50.50.15
With a diameter or cross section measuring less than 76 mm
7228.50.50.40
With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm
7228.50.50.70
With a diameter or cross section exceeding 228 mm
7228.60
Other bars and rods:
7228.60.10
Of tool steel (other than high-speed steel)
7228.60.10.30
Of ball-bearing steel
7228.60.10.60
Other
7228.60.60.00
Not cold-formed
7228.60.80.00
Cold-formed
7228.70
Angles, shapes and sections:
7228.70.30
Hot-rolled, not drilled, not punched and not otherwise advanced
7228.70.30.10
U, I, H and T sections
7228.70.30.20
Angles
7228.70.30.41
Other
7228.70.30.60
Angles
7228.70.30.81
Other
7228.70.60.00
Other
7228.80.00.00
Hollow drill bars and rods
9903.80.45
Angles, shapes and sections, provided for in subheading 7216.31.00, 7216.32.00, 7216.33.00, 7216.40.00, 7216.50.00, 7216.99.00, 7228.70.30 (except for statistical reporting numbers 7228.70.3060 and 7228.70.3081) or 7228.70.60
9903.80.48
Bars, hot-rolled, not of stainless steel, provided for in subheading 7213.20.00, 7213.99.00 (except for statistical reporting numbers 7213.99.0030 and 7213.99.0090), 7214.10.00, 7214.30.00, 7214.91.00, 7214.99.00, 7215.90.10, 7227.20.00 (except for statistical reporting number 7227.20.0030), 7227.90.60 (except for statistical reporting numbers 7227.90.6020, 7227.90.6030 and 7227.90.6035), 7228.20.10, 7228.30.80 (except for statistical reporting number 7228.30.8010), 7228.40.00, 7228.60.60 or 7228.80.00
9903.80.49
Bars, cold-finished, not of stainless steel, provided for in subheading 7215.10.00, 7215.50.00, 7215.90.30, 7215.90.50, 7228.20.50, 7228.50.50 or 7228.60.80
9903.80.50
Angles, shapes and sections of a type known as “light-shaped bars” and other products, provided for in subheading 7216.10.00, 7216.21.00, 7216.22.00 or 7228.70.30 (except for statistical reporting numbers 7228.70.3010, 7228.70.3020 and 7228.70.3041)
9903.80.51
Reinforcing bars, provided for in subheading 7213.10.00, 7214.20.00 or 7228.30.80 (except for statistical reporting numbers 7228.30.8005, 7228.30.8015, 7228.30.8041, 7228.30.8045 and 7228.30.8070)
9903.80.56
Products of tool steel and other products, provided for in subheading 7224.10.00 (except for statistical reporting numbers 7224.10.0005 and 7224.10.0075), 7224.90.00 (except for statistical reporting numbers 7224.90.0005, 7224.90.0045, 7224.90.0055, 7224.90.0065 and 7224.90.0075), 7225.30.11, 7225.30.51, 7225.40.11, 7225.40.51, 7225.50.11, 7226.20.00, 7226.91.05, 7226.91.15, 7226.91.25, 7226.92.10, 7226.92.30, 7227.10.00, 7227.90.10, 7227.90.20, 7228.10.00, 7228.30.20, 7228.30.40, 7228.30.60, 7228.50.10, 7228.60.10 or 7229.90.05
9903.81.06
Angles, shapes and sections (provided for in subheading 7216.31.00, 7216.32.00, 7216.33.00, 7216.40.00, 7216.50.00, 7216.99.00, 7228.70.30 (except for statistical reporting number 7228.70.3060 or 7228.70.3081) or 7228.70.60)
9903.81.09
Bars, hot-rolled, not of stainless steel (provided for in subheading 7213.20.00, 7213.99.00 (except for statistical reporting number 7213.99.0030 or 7213.99.0090), 7214.10.00, 7214.30.00, 7214.91.00, 7214.99.00, 7215.90.10, 7227.20.00 (except for statistical reporting number 7227.20.0030), 7227.90.60 (except for statistical reporting number 7227.90.6020, 7227.90.6030 or 7227.90.6035), 7228.20.10, 7228.30.80 (except for statistical reporting number 7228.30.8010), 7228.40.00, 7228.60.60 or 7228.80.00).
9903.81.10
Bars, cold-finished, not of stainless steel (provided for in subheading 7215.10.00, 7215.50.00, 7215.90.30, 7215.90.50, 7228.20.50, 7228.50.50 or 7228.60.80)
9903.81.11
Angles, shapes and sections of a type known as “light-shaped bars” (provided for in subheading 7216.10.00, 7216.21.00, 7216.22.00 or 7228.70.30 (except for statistical reporting number 7228.70.3010, 7228.70.3020 or 7228.70.3041))
9903.81.12
Reinforcing bars (provided for in subheading 7213.10.00, 7214.20.00 or 7228.30.80 (except for statistical reporting number 7228.30.8005, 7228.30.8015, 7228.30.8041, 7228.30.8045 or 7228.30.8070))
9903.81.17
Products of tool steel (provided for in subheading 7224.10.00 (except for statistical reporting number 7224.10.0005 or 7224.10.0075), 7224.90.00 (except for statistical reporting number 7224.90.0005, 7224.90.0045, 7224.90.0055, 7224.90.0065 or 7224.90.0075), 7225.30.11, 7225.30.51, 7225.40.11, 7225.40.51, 7225.50.11, 7226.20.00, 7226.91.05, 7226.91.15, 7226.91.25, 7226.92.10, 7226.92.30, 7227.10.00, 7227.90.10, 7227.90.20, 7228.10.00, 7228.30.20, 7228.30.40, 7228.30.60, 7228.50.10, 7228.60.10 or 7229.90.05)
9903.81.65
Angles, shapes and sections (provided for in subheading 7216.31.00, 7216.32.00, 7216.33.00, 7216.40.00, 7216.50.00, 7216.99.00, 7228.70.30 (except for statistical reporting number 7228.70.3060 or 7228.70.3081) or 7228.70.60)
9903.81.68
Bars, hot-rolled, not of stainless steel (provided for in subheading 7213.20.00, 7213.99.00 (except for statistical reporting number 7213.99.0030 or 7213.99.0090), 7214.10.00, 7214.30.00, 7214.91.00, 7214.99.00, 7215.90.10, 7227.20.00 (except for statistical reporting number 7227.20.0030), 7227.90.60 (except for statistical reporting number 7227.90.6020, 7227.90.6030 or 7227.90.6035), 7228.20.10, 7228.30.80 (except for statistical reporting number 7228.30.8010), 7228.40.00, 7228.60.60 or 7228.80.00))
9903.81.69
Bars, cold-finished, not of stainless steel (provided for in subheading 7215.10.00, 7215.50.00, 7215.90.30, 7215.90.50, 7228.20.50, 7228.50.50 or 7228.60.80)
9903.81.70
Angles, shapes and sections of a type known as “light-shaped bars” (provided for in subheading 7216.10.00, 7216.21.00, 7216.22.00 or 7228.70.30 (except for statistical reporting number 7228.70.3010, 7228.70.3020 or 7228.70.3041))
9903.81.71
Reinforcing bars (provided for in subheading 7213.10.00, 7214.20.00 or 7228.30.80 (except for statistical reporting number 7228.30.8005, 7228.30.8015, 7228.30.8041, 7228.30.8045 or 7228.30.8070))
9903.81.76
Products of tool steel (provided for in subheading 7224.10.00 (except for statistical reporting number 7224.10.0005 or 7224.10.0075), 7224.90.00 (except for statistical reporting number 7224.90.0005, 7224.90.0045, 7224.90.0055, 7224.90.0065 or 7224.90.0075), 7225.30.11, 7225.30.51, 7225.40.11, 7225.40.51, 7225.50.11, 7226.20.00, 7226.91.05, 7226.91.15, 7226.91.25, 7226.92.10, 7226.92.30, 7227.10.00, 7227.90.10, 7227.90.20, 7228.10.00, 7228.30.20, 7228.30.40, 7228.30.60, 7228.50.10, 7228.60.10 or 7229.90.05)
9903.80.45
Angles, shapes and sections, provided for in subheading 7216.31.00, 7216.32.00, 7216.33.00, 7216.40.00, 7216.50.00, 7216.99.00, 7228.70.30 (except for statistical reporting numbers 7228.70.3060 and 7228.70.3081) or 7228.70.60
9903.80.48
Bars, hot-rolled, not of stainless steel, provided for in subheading 7213.20.00, 7213.99.00 (except for statistical reporting numbers 7213.99.0030 and 7213.99.0090), 7214.10.00, 7214.30.00, 7214.91.00, 7214.99.00, 7215.90.10, 7227.20.00 (except for statistical reporting number 7227.20.0030), 7227.90.60 (except for statistical reporting numbers 7227.90.6020, 7227.90.6030 and 7227.90.6035), 7228.20.10, 7228.30.80 (except for statistical reporting number 7228.30.8010), 7228.40.00, 7228.60.60 or 7228.80.00
9903.80.49
Bars, cold-finished, not of stainless steel, provided for in subheading 7215.10.00, 7215.50.00, 7215.90.30, 7215.90.50, 7228.20.50, 7228.50.50 or 7228.60.80
9903.80.50
Angles, shapes and sections of a type known as “light-shaped bars” and other products, provided for in subheading 7216.10.00, 7216.21.00, 7216.22.00 or 7228.70.30 (except for statistical reporting numbers 7228.70.3010, 7228.70.3020 and 7228.70.3041)
9903.80.51
Reinforcing bars, provided for in subheading 7213.10.00, 7214.20.00 or 7228.30.80 (except for statistical reporting numbers 7228.30.8005, 7228.30.8015, 7228.30.8041, 7228.30.8045 and 7228.30.8070)
9903.80.56
Products of tool steel and other products, provided for in subheading 7224.10.00 (except for statistical reporting numbers 7224.10.0005 and 7224.10.0075), 7224.90.00 (except for statistical reporting numbers 7224.90.0005, 7224.90.0045, 7224.90.0055, 7224.90.0065 and 7224.90.0075), 7225.30.11, 7225.30.51, 7225.40.11, 7225.40.51, 7225.50.11, 7226.20.00, 7226.91.05, 7226.91.15, 7226.91.25, 7226.92.10, 7226.92.30, 7227.10.00, 7227.90.10, 7227.90.20, 7228.10.00, 7228.30.20, 7228.30.40, 7228.30.60, 7228.50.10, 7228.60.10 or 7229.90.05
9903.81.06
Angles, shapes and sections (provided for in subheading 7216.31.00, 7216.32.00, 7216.33.00, 7216.40.00, 7216.50.00, 7216.99.00, 7228.70.30 (except for statistical reporting number 7228.70.3060 or 7228.70.3081) or 7228.70.60)
9903.81.09
Bars, hot-rolled, not of stainless steel (provided for in subheading 7213.20.00, 7213.99.00 (except for statistical reporting number 7213.99.0030 or 7213.99.0090), 7214.10.00, 7214.30.00, 7214.91.00, 7214.99.00, 7215.90.10, 7227.20.00 (except for statistical reporting number 7227.20.0030), 7227.90.60 (except for statistical reporting number 7227.90.6020, 7227.90.6030 or 7227.90.6035), 7228.20.10, 7228.30.80 (except for statistical reporting number 7228.30.8010), 7228.40.00, 7228.60.60 or 7228.80.00).
9903.81.10
Bars, cold-finished, not of stainless steel (provided for in subheading 7215.10.00, 7215.50.00, 7215.90.30, 7215.90.50, 7228.20.50, 7228.50.50 or 7228.60.80)
9903.81.11
Angles, shapes and sections of a type known as “light-shaped bars” (provided for in subheading 7216.10.00, 7216.21.00, 7216.22.00 or 7228.70.30 (except for statistical reporting number 7228.70.3010, 7228.70.3020 or 7228.70.3041))
9903.81.12
Reinforcing bars (provided for in subheading 7213.10.00, 7214.20.00 or 7228.30.80 (except for statistical reporting number 7228.30.8005, 7228.30.8015, 7228.30.8041, 7228.30.8045 or 7228.30.8070))
9903.81.17
Products of tool steel (provided for in subheading 7224.10.00 (except for statistical reporting number 7224.10.0005 or 7224.10.0075), 7224.90.00 (except for statistical reporting number 7224.90.0005, 7224.90.0045, 7224.90.0055, 7224.90.0065 or 7224.90.0075), 7225.30.11, 7225.30.51, 7225.40.11, 7225.40.51, 7225.50.11, 7226.20.00, 7226.91.05, 7226.91.15, 7226.91.25, 7226.92.10, 7226.92.30, 7227.10.00, 7227.90.10, 7227.90.20, 7228.10.00, 7228.30.20, 7228.30.40, 7228.30.60, 7228.50.10, 7228.60.10 or 7229.90.05)
9903.81.65
Angles, shapes and sections (provided for in subheading 7216.31.00, 7216.32.00, 7216.33.00, 7216.40.00, 7216.50.00, 7216.99.00, 7228.70.30 (except for statistical reporting number 7228.70.3060 or 7228.70.3081) or 7228.70.60)
9903.81.68
Bars, hot-rolled, not of stainless steel (provided for in subheading 7213.20.00, 7213.99.00 (except for statistical reporting number 7213.99.0030 or 7213.99.0090), 7214.10.00, 7214.30.00, 7214.91.00, 7214.99.00, 7215.90.10, 7227.20.00 (except for statistical reporting number 7227.20.0030), 7227.90.60 (except for statistical reporting number 7227.90.6020, 7227.90.6030 or 7227.90.6035), 7228.20.10, 7228.30.80 (except for statistical reporting number 7228.30.8010), 7228.40.00, 7228.60.60 or 7228.80.00))
9903.81.69
Bars, cold-finished, not of stainless steel (provided for in subheading 7215.10.00, 7215.50.00, 7215.90.30, 7215.90.50, 7228.20.50, 7228.50.50 or 7228.60.80)
9903.81.70
Angles, shapes and sections of a type known as “light-shaped bars” (provided for in subheading 7216.10.00, 7216.21.00, 7216.22.00 or 7228.70.30 (except for statistical reporting number 7228.70.3010, 7228.70.3020 or 7228.70.3041))
9903.81.71
Reinforcing bars (provided for in subheading 7213.10.00, 7214.20.00 or 7228.30.80 (except for statistical reporting number 7228.30.8005, 7228.30.8015, 7228.30.8041, 7228.30.8045 or 7228.30.8070))
9903.81.76
Products of tool steel (provided for in subheading 7224.10.00 (except for statistical reporting number 7224.10.0005 or 7224.10.0075), 7224.90.00 (except for statistical reporting number 7224.90.0005, 7224.90.0045, 7224.90.0055, 7224.90.0065 or 7224.90.0075), 7225.30.11, 7225.30.51, 7225.40.11, 7225.40.51, 7225.50.11, 7226.20.00, 7226.91.05, 7226.91.15, 7226.91.25, 7226.92.10, 7226.92.30, 7227.10.00, 7227.90.10, 7227.90.20, 7228.10.00, 7228.30.20, 7228.30.40, 7228.30.60, 7228.50.10, 7228.60.10 or 7229.90.05)
| Heading/ Subheading |
Stat Suffix |
Article Description | Unit of Quantity |
Rates of Duty | ||
| 1 | 2 | |||||
| General | Special | |||||
| Heading/ Subheading |
Stat Suffix |
Article Description | Unit of Quantity |
Rates of Duty | ||
| 1 | 2 | |||||
| General | Special | |||||
| 7228 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: | |||||
| 7228.10.00 | Bars and rods, of high-speed steel | Free | 32% | |||
| 10 | Not cold-formed | kg | ||||
| Cold-formed: | ||||||
| 7228.10.00 | 30 | With a maximum cross-sectional dimension of less than | kg | |||
| 60 | With a maximum cross-sectional dimension of | kg | ||||
| 7228.20 | Bars and rods, of silico-manganese steel: | |||||
| 7228.20.10 | 00 | Not cold-formed | kg | Free | 28% | |
| 7228.20.50 | 00 | Cold-formed | kg | Free | 28% | |
| Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded: | ||||||
| 7228.30 | Of tool steel (other than high-speed steel): | |||||
| 7228.30.20 | 00 | Of ball-bearing steel | kg | Free | 29% | |
| 7228.30.40 | 00 | Of chipper knife steel, not cold-formed | kg | Free | 28% | |
| 7228.30.60 | 00 | Other | kg | Free | 29% | |
| 7228.30.80 | Other | Free | 28% | |||
| 05 | Of high-nickel alloy steel | kg | ||||
| 10 | Concrete reinforcing bars and rods | kg | ||||
| Other: | ||||||
| 7228.30.80 | 15 | With a diameter or cross section measuring less than 76 mm | kg | |||
| 41 | With a diameter or cross section measuring 76 mm or more but not exceeding 152 mm | kg | ||||
| 45 | With a diameter or cross section measuring 152 mm or more but not exceeding 228 mm | kg | ||||
| 70 | With a diameter or cross section exceeding 228 mm | kg | ||||
| 7228.40.00 | 00 | Other bars and rods, not further worked than forged | kg | Free | 28% | |
| 7228.50 | Other bars and rods, not further worked than cold-formed or cold-finished: | |||||
| 7228.50.10 | Of tool steel (other than high-speed steel) | Free | 29% | |||
| 10 | Of ball-bearing steel | kg | ||||
| Other: | ||||||
| With a maximum cross-sectional dimension of less than | ||||||
| 7228.50.10 | 20 | Of round or rectangular cross section with surfaces ground, milled or polished | kg | |||
| 40 | Other | kg | ||||
| With a maximum cross-sectional dimension of | ||||||
| 7228.50.10 | 60 | Of round or rectangular cross section with surfaces ground, milled or polished | kg | |||
| 80 | Other | kg | ||||
| 7228.50.50 | Other | Free | 28% | |||
| 05 | Of high-nickel alloy steel | kg | ||||
| Other: | ||||||
| 7228.50.50 | 15 | With a diameter or cross section measuring less than 76 mm | kg | |||
| 40 | With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm | kg | ||||
| 70 | With a diameter or cross section exceeding 228 mm | kg | ||||
| 7228.60 | Other bars and rods: | |||||
| 7228.60.10 | Of tool steel (other than high-speed steel) | Free | 29% | |||
| 30 | Of ball-bearing steel | kg | ||||
| 60 | Other | kg | ||||
| Other: | ||||||
| 7228.60.60 | 00 | Not cold-formed | kg | Free | 28% | |
| 7228.60.80 | 00 | Cold-formed | kg | Free | 28% | |
| 7228.70 | Angles, shapes and sections: | |||||
| 7228.70.30 | Hot-rolled, not drilled, not punched and not otherwise advanced | Free | 10% | |||
| 10 | U, I, H and T sections | kg | ||||
| Other: | ||||||
| With a maximum cross-sectional dimension of 76 mm or more: | ||||||
| 7228.70.30 | 20 | Angles | kg | |||
| 41 | Other | kg | ||||
| With a maximum cross-sectional dimension of less than 76 mm: | ||||||
| 7228.70.30 | 60 | Angles | kg | |||
| 81 | Other | kg | ||||
| 7228.70.60 | 00 | Other | kg | Free | 28% | |
| 7228.80.00 | 00 | Hollow drill bars and rods | kg | Free | 30% | |